enclosed
Sort by:
Baldor CEM3663T
$1,606.22
Baldor CEM3663T-5
$1,606.22
Baldor CEM3664T
$1,482.25
Baldor CEM3665T
$1,389.27
Baldor CEM3665T-5
$1,389.27
Baldor CEM3704T
$1,650.69
Baldor CEM3708T
$1,844.73
Baldor CEM3709T
$1,779.37
Baldor CEM3710T
$1,443.17
Baldor CEM3710T-5
$1,443.17
Baldor CEM3711T
$1,801.61
Baldor CEM3711T-5
$1,801.61
Baldor CEM3713T
$2,478.73
Baldor CEM3713T-5
$2,478.73
Baldor CEM3714T
$1,610.94
Baldor CEM3714T-5
$1,610.94
Baldor CEM3764T
$1,926.93
Baldor CEM3768T
$2,201.14
Baldor CEM3769T
$1,949.16
Baldor CEM3769T-5
$1,949.16
Baldor CEM3770T
$1,885.83
Baldor CEM3770T-5
$1,885.83
Baldor CEM3771T
$2,247.63
Baldor CEM3771T-5
$2,247.63
Baldor CEM3774T
$2,089.30
Baldor CEM3774T-5
$2,089.30
Baldor CEM4103T
$4,915.68
Baldor CEM4103T-5
$4,915.68
Baldor CEM4104T
$5,671.63
Baldor CEM4104T-5
$5,671.63
Baldor CEM4106T
$3,715.73
Baldor CEM4106T-5
$3,715.73
Baldor CEM4107T
$4,862.45
Baldor CEM4108T
$5,615.71
Baldor CEM4109T
$7,510.97
Baldor CEM4110T
$7,284.59
Baldor CEM4114T
$8,123.40
Baldor CEM4115T
$7,868.05
Baldor CEM4310T
$11,098.01
Baldor CEM4313T
$12,733.88
Baldor CEM4314T
$10,972.69
Baldor CEM4316T
$12,647.64
Baldor CEM4400T
$15,716.57
Baldor CENM3546
$849.60
Baldor CM3534
$417.73
Baldor CM3534-5
$417.73
Baldor CM3537
$434.57
Baldor CM3538
$411.66
Baldor CM3538-5
$411.66
Baldor CM3538-8
$524.85
Baldor CM3539
$679.14
Baldor CM3541
$474.99
Baldor CM3542
$489.14
Baldor CM3542-5
$489.14
Baldor CM3543
$692.62
Baldor CNM3454/35
$581.45
Baldor CNM3457
$427.16
Baldor CNM3531
$739.10
Baldor CNM3538/35
$594.92
Baldor CNM3539
$725.63
Baldor CNM3542
$533.61
Baldor EFM2333T
$2,558.23
Baldor EFM2334T
$3,101.95
Baldor EFM2394T
$2,796.06
Baldor EFM3546T
$818.61
Baldor EFM3554T
$909.56
Baldor EFM3558T
$962.12
Baldor EFM3610T
$978.29
Baldor EFM3611T
$987.72
Baldor EFM3613T
$1,084.74
Baldor EFM3615T
$1,019.38
Baldor EFM3709T
$1,625.09
Servo Lab Capabilities
We have documented 96 different Servo Manufacturer repair reports in our Database
We repair AC Servos, DC Servos, AC Spindles, and AC Actuators
Capable of 24-hour repairs in many cases
We have thousands of spare and rebuilt motors in our inventory for parts or exchange motorsServo Lab Repair Procedures
-
Data
Motor nameplate data is recorded
-
Inspection
A visual inspection of any damage to the motor.
We check for- Damaged Leads/Terminals
- Worn output shaft/keyways
- Cracks in end bells or covers
-
Job Ticket
We complete to full write up off all motor data
Including- All winding tests (Resistance, Meg Ω, Continuity)
- All bearing sizes
- All seal sizes
- Brake torque tests (Record Torque, winding resistance)
- Feedback Tests (Tachometer/Encoder)
-
Motor Disassembly
- Bearing and seal sizes are recorded
- Bearing fits are measured on shaft and End bell
- Brake torque is measured as well as resistance and Meg Ω
- More winding tests are performed (Surge and HiPOT tests)
- Stator is then washed and baked in oven
- Magnets are inspected for cracks or if loose on shaft
- Encoder is tested with either (Heidenhain PWM20, Sick PGT-11, or Mitchell Electronics equipment)
-
Assembly
- New bearings are installed
- New seals are installed
- If required, new windings are impregnated
- Brakes are rebuilt or replaced depending on manufacturer design.
- Rebuilt or New encoders are installed and aligned using:
- (Heidenhain PWM20, Sick PGT-11, or Mitchell Electronics equipment)
-
Rotor Balancing and Testing
- Rotor is run through a full vibration diagnostic
-
Run Testing
- Every Motor is Run for a minimum of 1 hour using one of our drives.
- We use Siemens S110, S120, IndraDrive, AB Kinetix 300, Yaskawa 7, and AMC drives
-
Service Report
- A Final 3-page Service Report is filled out
- Pinout diagram for power and feedback is provided
- Brake torque is recorded a final time for our Service Reports
- A photo of nameplate and motor is attached
- A motor tag is installed on motor with QR code linking Service Report and Job Histories
- If requested, a YouTube link is attached to the service report of motor
A&C Electric is a certified distributor service center.