enclosed
Sort by:
Baldor VEM3713T
$2,478.73
Baldor VEM3713T-5
$2,478.73
Baldor VEM3714T
$1,815.08
Baldor VEM3714T-5
$1,815.08
Baldor VEM3770T
$1,885.83
Baldor VEM3770T-5
$1,885.83
Baldor VEM3774T
$2,089.30
Baldor VEM3774T-5
$2,089.30
Baldor VEM4103T
$4,915.68
Baldor VEM4104T
$5,671.63
Baldor VEM4106T
$3,715.73
Baldor VEM4107T
$4,862.45
Baldor VEM4108T
$5,615.71
Baldor VENM3538
$711.48
Baldor VENM3542
$776.83
Baldor VENM3546
$849.60
Baldor VENM3546T
$861.05
Baldor VENM3581T
$1,084.74
Baldor VM3531
$557.87
Baldor VM3534
$394.82
Baldor VM3534-5
$394.82
Baldor VM3535
$626.59
Baldor VM3537
$428.51
Baldor VM3537-5
$428.51
Baldor VM3538
$402.90
Baldor VM3538-5
$402.90
Baldor VM3539
$672.40
Baldor VM3541
$468.26
Baldor VM3541-5
$468.26
Baldor VM3542
$479.04
Baldor VM3542-5
$479.04
Baldor VM3543
$687.90
Baldor VM3543T
$687.90
Baldor VNM3537
$602.33
Baldor VNM3538
$492.51
Baldor VNM3541
$643.43
Baldor VNM3542
$504.64
Baldor EM3611
$1,443.22
Baldor L3510TM
$774.14
Baldor L3514TM
$874.53
Baldor L3605TM
$1,339.18
Baldor L3708TM
$1,810.46
Baldor CL3403
$441.14
Baldor CL3405
$439.77
Baldor CL3501
$460.32
Baldor CL3503
$461.01
Baldor CL3504
$537.73
Baldor CL3506
$513.07
Baldor CL3507
$641.85
Baldor CL3509
$593.21
Baldor CL3510
$724.05
Baldor CL3513
$767.89
Baldor CL3514
$859.68
Baldor CL3515
$990.51
Baldor CL3515T
$998.05
Baldor CL3709T
$2,289.96
Baldor CL3710T
$2,318.04
Baldor CL3711T
$2,921.53
Baldor CL3712T
$2,956.46
Baldor EL3403
$509.64
Baldor EL3501
$563.07
Baldor EL3503
$552.80
Baldor EL3504
$664.45
Baldor EL3506
$621.30
Baldor EL3507
$807.62
Baldor EL3509
$717.20
Baldor EL3510
$928.18
Baldor EL3514
$1,056.96
Baldor EL3514T
$1,056.96
Baldor EL3515T
$1,239.85
Baldor EL3605T
$1,444.67
Baldor EL3606T
$1,348.77
Servo Lab Capabilities
We have documented 96 different Servo Manufacturer repair reports in our Database
We repair AC Servos, DC Servos, AC Spindles, and AC Actuators
Capable of 24-hour repairs in many cases
We have thousands of spare and rebuilt motors in our inventory for parts or exchange motorsServo Lab Repair Procedures
-
Data
Motor nameplate data is recorded
-
Inspection
A visual inspection of any damage to the motor.
We check for- Damaged Leads/Terminals
- Worn output shaft/keyways
- Cracks in end bells or covers
-
Job Ticket
We complete to full write up off all motor data
Including- All winding tests (Resistance, Meg Ω, Continuity)
- All bearing sizes
- All seal sizes
- Brake torque tests (Record Torque, winding resistance)
- Feedback Tests (Tachometer/Encoder)
-
Motor Disassembly
- Bearing and seal sizes are recorded
- Bearing fits are measured on shaft and End bell
- Brake torque is measured as well as resistance and Meg Ω
- More winding tests are performed (Surge and HiPOT tests)
- Stator is then washed and baked in oven
- Magnets are inspected for cracks or if loose on shaft
- Encoder is tested with either (Heidenhain PWM20, Sick PGT-11, or Mitchell Electronics equipment)
-
Assembly
- New bearings are installed
- New seals are installed
- If required, new windings are impregnated
- Brakes are rebuilt or replaced depending on manufacturer design.
- Rebuilt or New encoders are installed and aligned using:
- (Heidenhain PWM20, Sick PGT-11, or Mitchell Electronics equipment)
-
Rotor Balancing and Testing
- Rotor is run through a full vibration diagnostic
-
Run Testing
- Every Motor is Run for a minimum of 1 hour using one of our drives.
- We use Siemens S110, S120, IndraDrive, AB Kinetix 300, Yaskawa 7, and AMC drives
-
Service Report
- A Final 3-page Service Report is filled out
- Pinout diagram for power and feedback is provided
- Brake torque is recorded a final time for our Service Reports
- A photo of nameplate and motor is attached
- A motor tag is installed on motor with QR code linking Service Report and Job Histories
- If requested, a YouTube link is attached to the service report of motor
A&C Electric is a certified distributor service center.