enclosed
Sort by:
Baldor L3409-50
$577.46
Baldor L3501-50
$507.59
Baldor L3503-50
$496.63
Baldor L3504-50
$577.46
Baldor L3506-50
$554.17
Baldor L3507-50
$685.69
Baldor L3509-50
$643.90
Baldor L3510-50
$788.44
Baldor L3513-50
$848.03
Baldor L3514-50
$891.19
Baldor L3514T-50
$891.19
Baldor L3515-50
$1,102.85
Baldor L3605T-50
$1,259.72
Baldor L3609T-50
$1,483.03
Baldor L3708T-50
$1,773.47
Baldor VL3501-50
$556.91
Baldor VL3503-50
$505.53
Baldor VL3504-50
$645.27
Baldor VL3506-50
$582.25
Baldor VL3507-50
$764.46
Baldor VL3509-50
$685.00
Baldor VL3510-50
$875.43
Baldor VL3513-50
$880.91
Baldor VL3514-50
$989.14
Baldor VL3515-50
$1,117.92
Baldor EM2333T-58
$2,789.33
Baldor EM2334T-58
$3,381.55
Baldor EM3545-57
$693.29
Baldor EM3546T-57
$708.79
Baldor EM3550T-57
$804.46
Baldor EM3554T-57
$720.91
Baldor EM3555T-57
$883.29
Baldor EM3558T-57
$761.34
Baldor EM3610T-57
$1,125.84
Baldor EM3611T-57
$893.39
Baldor EM3613T-57
$1,294.95
Baldor EM3615T-57
$1,031.51
Baldor EM3709T-58
$1,796.22
Baldor EM3710T-58
$1,431.05
Baldor EM3711T-58
$1,904.69
Baldor EM3714T-58
$1,810.37
Baldor EM4103T-58
$4,423.17
Baldor EM4104T-58
$5,246.49
Baldor EM4110T-58
$6,860.80
Baldor EM4115T-58
$7,496.82
Baldor EM4314T-58
$10,786.06
Baldor KM3454-57
$400.21
Baldor M3538-57
$494.53
Baldor M3541-57
$494.53
Baldor M3542-57
$528.89
Baldor VEM3545-57
$700.03
Baldor VEM3546-57
$693.29
Baldor VEM3546T-57
$693.29
Baldor VEM3550T-57
$761.34
Baldor VEM3554T-57
$720.24
Baldor VEM3555-57
$755.27
Baldor VEM3555T-57
$830.73
Baldor VEM3558T-57
$763.36
Baldor VM3534-57
$452.76
Baldor VM3537-57
$491.16
Baldor VM3538-57
$528.89
Baldor VM3541-57
$512.72
Baldor VM3542-57
$567.97
Baldor EM3770T-8
$1,668.88
Baldor EM3771T
$2,030.01
Baldor EM3771T-8
$2,030.01
Baldor EM3774T
$1,871.68
Baldor EM3774T-5
$1,871.68
Baldor EM3774T-8
$1,871.68
Baldor EM4100T
$4,304.59
Baldor EM4102T
$5,731.59
Baldor EM4103T
$3,601.19
Servo Lab Capabilities
We have documented 96 different Servo Manufacturer repair reports in our Database
We repair AC Servos, DC Servos, AC Spindles, and AC Actuators
Capable of 24-hour repairs in many cases
We have thousands of spare and rebuilt motors in our inventory for parts or exchange motorsServo Lab Repair Procedures
-
Data
Motor nameplate data is recorded
-
Inspection
A visual inspection of any damage to the motor.
We check for- Damaged Leads/Terminals
- Worn output shaft/keyways
- Cracks in end bells or covers
-
Job Ticket
We complete to full write up off all motor data
Including- All winding tests (Resistance, Meg Ω, Continuity)
- All bearing sizes
- All seal sizes
- Brake torque tests (Record Torque, winding resistance)
- Feedback Tests (Tachometer/Encoder)
-
Motor Disassembly
- Bearing and seal sizes are recorded
- Bearing fits are measured on shaft and End bell
- Brake torque is measured as well as resistance and Meg Ω
- More winding tests are performed (Surge and HiPOT tests)
- Stator is then washed and baked in oven
- Magnets are inspected for cracks or if loose on shaft
- Encoder is tested with either (Heidenhain PWM20, Sick PGT-11, or Mitchell Electronics equipment)
-
Assembly
- New bearings are installed
- New seals are installed
- If required, new windings are impregnated
- Brakes are rebuilt or replaced depending on manufacturer design.
- Rebuilt or New encoders are installed and aligned using:
- (Heidenhain PWM20, Sick PGT-11, or Mitchell Electronics equipment)
-
Rotor Balancing and Testing
- Rotor is run through a full vibration diagnostic
-
Run Testing
- Every Motor is Run for a minimum of 1 hour using one of our drives.
- We use Siemens S110, S120, IndraDrive, AB Kinetix 300, Yaskawa 7, and AMC drives
-
Service Report
- A Final 3-page Service Report is filled out
- Pinout diagram for power and feedback is provided
- Brake torque is recorded a final time for our Service Reports
- A photo of nameplate and motor is attached
- A motor tag is installed on motor with QR code linking Service Report and Job Histories
- If requested, a YouTube link is attached to the service report of motor
A&C Electric is a certified distributor service center.