enclosed
Sort by:
Baldor VL3505
$976.81
Baldor VL3506
$507.59
Baldor VL3506A
$560.33
Baldor VL3507
$604.86
Baldor VL3508
$1,123.40
Baldor VL3509
$584.31
Baldor VL3509A
$638.42
Baldor VL3510
$692.54
Baldor VL3510T
$692.54
Baldor VL3513
$758.98
Baldor VL3513T
$806.25
Baldor VL3514
$785.01
Baldor VL3514T
$793.92
Baldor VL3515
$972.02
Baldor VL3515T
$990.51
Baldor VL3605T
$1,402.88
Baldor VL3606T
$1,565.91
Baldor VL3609T
$1,657.02
Baldor CEM2276T
$3,195.60
Baldor CEM2333T
$2,844.57
Baldor CEM2333T-5
$2,844.57
Baldor CEM2334T
$3,748.75
Baldor CEM2334T-5
$3,748.75
Baldor CEM2394T
$3,442.86
Baldor CEM3545
$742.47
Baldor CEM3546
$849.60
Baldor CEM3546-5
$849.60
Baldor CEM3546-8
$849.60
Baldor CEM3546T
$764.71
Baldor CEM3546T-5
$764.71
Baldor CEM3550
$836.80
Baldor CEM3550T
$847.58
Baldor CEM3554
$941.23
Baldor CEM3554-5
$940.56
Baldor CEM3554T
$845.56
Baldor CEM3554T-5
$845.56
Baldor CEM3555
$912.93
Baldor CEM3555T
$924.39
Baldor CEM3556
$969.53
Baldor CEM3556T
$980.98
Baldor CEM3558
$993.11
Baldor CEM3558-5
$993.11
Baldor CEM3558T
$892.05
Baldor CEM3558T-5
$892.05
Baldor CEM3559
$997.15
Baldor CEM3559T
$1,008.60
Baldor CEM3559T-5
$1,008.60
Baldor CEM3581T
$1,084.74
Baldor CEM3581T-5
$1,084.74
Baldor CEM3583T
$1,144.03
Baldor CEM3583T-5
$1,144.03
Baldor CEM3584T
$1,122.47
Baldor CEM3584T-5
$1,122.47
Baldor CEM3586T
$1,197.25
Baldor CEM3586T-5
$1,197.25
Baldor CEM3587T
$1,173.67
Baldor CEM3587T-5
$1,173.67
Baldor CEM3607T
$1,177.04
Baldor CEM3610T
$1,058.46
Baldor CEM3610T-5
$1,058.46
Baldor CEM3611T
$947.29
Baldor CEM3611T-5
$947.29
Baldor CEM3613T
$1,164.91
Baldor CEM3613T-5
$1,164.91
Baldor CEM3614T
$1,230.27
Baldor CEM3615T
$976.26
Baldor CEM3615T-5
$976.26
Baldor CEM3616T
$1,511.22
Baldor CEM3660T
$1,325.94
Baldor CEM3660T-5
$1,325.94
Baldor CEM3661T
$1,360.30
Baldor CEM3661T-5
$1,360.30
Servo Lab Capabilities
We have documented 96 different Servo Manufacturer repair reports in our Database
We repair AC Servos, DC Servos, AC Spindles, and AC Actuators
Capable of 24-hour repairs in many cases
We have thousands of spare and rebuilt motors in our inventory for parts or exchange motorsServo Lab Repair Procedures
-
Data
Motor nameplate data is recorded
-
Inspection
A visual inspection of any damage to the motor.
We check for- Damaged Leads/Terminals
- Worn output shaft/keyways
- Cracks in end bells or covers
-
Job Ticket
We complete to full write up off all motor data
Including- All winding tests (Resistance, Meg Ω, Continuity)
- All bearing sizes
- All seal sizes
- Brake torque tests (Record Torque, winding resistance)
- Feedback Tests (Tachometer/Encoder)
-
Motor Disassembly
- Bearing and seal sizes are recorded
- Bearing fits are measured on shaft and End bell
- Brake torque is measured as well as resistance and Meg Ω
- More winding tests are performed (Surge and HiPOT tests)
- Stator is then washed and baked in oven
- Magnets are inspected for cracks or if loose on shaft
- Encoder is tested with either (Heidenhain PWM20, Sick PGT-11, or Mitchell Electronics equipment)
-
Assembly
- New bearings are installed
- New seals are installed
- If required, new windings are impregnated
- Brakes are rebuilt or replaced depending on manufacturer design.
- Rebuilt or New encoders are installed and aligned using:
- (Heidenhain PWM20, Sick PGT-11, or Mitchell Electronics equipment)
-
Rotor Balancing and Testing
- Rotor is run through a full vibration diagnostic
-
Run Testing
- Every Motor is Run for a minimum of 1 hour using one of our drives.
- We use Siemens S110, S120, IndraDrive, AB Kinetix 300, Yaskawa 7, and AMC drives
-
Service Report
- A Final 3-page Service Report is filled out
- Pinout diagram for power and feedback is provided
- Brake torque is recorded a final time for our Service Reports
- A photo of nameplate and motor is attached
- A motor tag is installed on motor with QR code linking Service Report and Job Histories
- If requested, a YouTube link is attached to the service report of motor
A&C Electric is a certified distributor service center.