open
Sort by:
Baldor EM3215T
$965.48
Baldor EM3216T
$1,322.57
Baldor EM3218T
$926.41
Baldor EM3218T-5
$926.41
Baldor EM3218T-8
$1,042.97
Baldor EM3218TA
$1,131.90
Baldor EM3219T
$1,396.68
Baldor EM3219T-5
$1,396.68
Baldor EM3219T-8
$1,396.68
Baldor EM3220T
$1,606.22
Baldor EM3303T
$1,983.52
Baldor EM3305T
$1,228.25
Baldor EM3309T
$1,609.59
Baldor EM3311T
$1,360.30
Baldor EM3311T-5
$1,360.30
Baldor EM3311T-8
$1,532.11
Baldor EM3312T
$1,597.46
Baldor EM3312T-8
$1,597.46
Baldor EM3313T
$1,646.65
Baldor EM3313T-5
$1,646.65
Baldor EM3313T-8
$1,854.83
Baldor EM3314T
$2,268.52
Baldor EM3314T-8
$2,268.52
Baldor KEM30003
$504.64
Baldor KEM30006
$528.22
Baldor M3153T
$650.17
Baldor M3160
$915.63
Baldor VEM2513T
$2,986.73
Baldor VEM2514T
$3,025.14
Baldor VEM2515T
$3,242.09
Baldor VEM2516T
$3,560.10
Baldor VEM2531T
$4,159.06
Baldor VEM2534T
$4,423.17
Baldor VEM31104
$531.59
Baldor VEM31107
$565.95
Baldor VEM31108
$582.79
Baldor VEM31109
$633.33
Baldor VEM31111
$563.93
Baldor VEM31112
$638.04
Baldor VEM31115
$576.73
Baldor VEM31116
$670.38
Baldor VEM31120
$594.92
Baldor VEM31153
$772.12
Baldor VEM31154
$731.02
Baldor VEM31155
$776.83
Baldor VEM31157
$765.38
Baldor VEM31158
$742.47
Baldor VEM3116T
$830.73
Baldor VEM3120T
$720.91
Baldor VEM3154T
$866.44
Baldor VEM3155T
$838.82
Baldor VEM3156T
$848.93
Baldor VEM3157T
$821.98
Baldor VEM3158T
$848.93
Baldor VEM3159T
$986.37
Baldor VEM3161T
$880.59
Baldor VEM3211T
$1,031.51
Baldor VEM3212T
$960.77
Baldor VEM3215T
$1,044.99
Baldor VEM3218T
$1,122.47
Baldor VEM3219T
$1,476.86
Baldor VEM3305T
$1,408.14
Baldor VEM3309T
$1,789.48
Baldor VEM3311T
$1,712.00
Baldor VEM3312T
$1,777.35
Baldor VEM3313T
$2,034.73
Baldor VEM3314T
$2,448.41
Baldor VM3153T
$672.40
Servo Lab Capabilities
We have documented 96 different Servo Manufacturer repair reports in our Database
We repair AC Servos, DC Servos, AC Spindles, and AC Actuators
Capable of 24-hour repairs in many cases
We have thousands of spare and rebuilt motors in our inventory for parts or exchange motorsServo Lab Repair Procedures
-
Data
Motor nameplate data is recorded
-
Inspection
A visual inspection of any damage to the motor.
We check for- Damaged Leads/Terminals
- Worn output shaft/keyways
- Cracks in end bells or covers
-
Job Ticket
We complete to full write up off all motor data
Including- All winding tests (Resistance, Meg Ω, Continuity)
- All bearing sizes
- All seal sizes
- Brake torque tests (Record Torque, winding resistance)
- Feedback Tests (Tachometer/Encoder)
-
Motor Disassembly
- Bearing and seal sizes are recorded
- Bearing fits are measured on shaft and End bell
- Brake torque is measured as well as resistance and Meg Ω
- More winding tests are performed (Surge and HiPOT tests)
- Stator is then washed and baked in oven
- Magnets are inspected for cracks or if loose on shaft
- Encoder is tested with either (Heidenhain PWM20, Sick PGT-11, or Mitchell Electronics equipment)
-
Assembly
- New bearings are installed
- New seals are installed
- If required, new windings are impregnated
- Brakes are rebuilt or replaced depending on manufacturer design.
- Rebuilt or New encoders are installed and aligned using:
- (Heidenhain PWM20, Sick PGT-11, or Mitchell Electronics equipment)
-
Rotor Balancing and Testing
- Rotor is run through a full vibration diagnostic
-
Run Testing
- Every Motor is Run for a minimum of 1 hour using one of our drives.
- We use Siemens S110, S120, IndraDrive, AB Kinetix 300, Yaskawa 7, and AMC drives
-
Service Report
- A Final 3-page Service Report is filled out
- Pinout diagram for power and feedback is provided
- Brake torque is recorded a final time for our Service Reports
- A photo of nameplate and motor is attached
- A motor tag is installed on motor with QR code linking Service Report and Job Histories
- If requested, a YouTube link is attached to the service report of motor
A&C Electric is a certified distributor service center.