open
Sort by:
Baldor EM2559T-4
$12,194.20
Baldor EM2559T-4CI
$13,289.05
Baldor EM2559T-5
$12,194.20
Baldor EM2559TS-4
$12,194.20
Baldor EM2560T-4
$17,710.19
Baldor EM2562T-4
$16,490.71
Baldor EM2563T-4
$16,925.95
Baldor EM2564T-4
$23,280.76
Baldor EM2565T-4
$19,345.38
Baldor EM2568T-4
$30,236.55
Baldor EM25694T-4
$28,944.30
Baldor EM2571T-4
$34,603.80
Baldor EM2572T-4
$34,188.77
Baldor EM2583T-4
$13,924.39
Baldor EM30003
$473.65
Baldor EM30004
$523.50
Baldor EM30006
$497.23
Baldor EM30007
$500.60
Baldor EM30008
$547.76
Baldor EM30009
$534.96
Baldor EM30010
$551.13
Baldor EM30011
$602.33
Baldor EM30012
$532.26
Baldor EM31101
$523.50
Baldor EM31104
$500.60
Baldor EM31104-5
$500.60
Baldor EM31105
$547.76
Baldor EM31107
$534.96
Baldor EM31108
$551.13
Baldor EM31108-5
$551.13
Baldor EM31108A
$625.91
Baldor EM31109
$602.33
Baldor EM31111
$532.26
Baldor EM31112
$607.05
Baldor EM31112-5
$607.05
Baldor EM31112A
$681.16
Baldor EM31115
$545.74
Baldor EM31116
$638.72
Baldor EM31116-5
$638.72
Baldor EM31116A
$669.03
Baldor EM31120
$563.93
Baldor EM31153
$741.13
Baldor EM31154
$700.03
Baldor EM31154A
$774.14
Baldor EM31155
$634.67
Baldor EM31156
$933.82
Baldor EM31157
$734.39
Baldor EM31158
$711.48
Baldor EM31159
$898.78
Baldor EM3116T
$700.03
Baldor EM3116T-5
$700.03
Baldor EM3116T-8
$788.96
Baldor EM3120T
$679.14
Baldor EM3154T
$732.37
Baldor EM3154T-5
$732.37
Baldor EM3154T-8
$824.00
Baldor EM3155T
$796.37
Baldor EM3156T
$806.48
Baldor EM3157T
$784.25
Baldor EM3157T-5
$784.25
Baldor EM3157T-8
$883.29
Baldor EM3157TA
$971.55
Baldor EM3158T
$806.48
Baldor EM3158T-8
$806.48
Baldor EM3207T
$943.92
Baldor EM3211T
$845.56
Baldor EM3211T-5
$845.56
Baldor EM3211T-8
$952.01
Baldor EM3211TA
$1,040.94
Baldor EM3212T
$880.59
Baldor EM3212T-5
$880.59
Baldor EM3212T-8
$880.59
Servo Lab Capabilities
We have documented 96 different Servo Manufacturer repair reports in our Database
We repair AC Servos, DC Servos, AC Spindles, and AC Actuators
Capable of 24-hour repairs in many cases
We have thousands of spare and rebuilt motors in our inventory for parts or exchange motorsServo Lab Repair Procedures
-
Data
Motor nameplate data is recorded
-
Inspection
A visual inspection of any damage to the motor.
We check for- Damaged Leads/Terminals
- Worn output shaft/keyways
- Cracks in end bells or covers
-
Job Ticket
We complete to full write up off all motor data
Including- All winding tests (Resistance, Meg Ω, Continuity)
- All bearing sizes
- All seal sizes
- Brake torque tests (Record Torque, winding resistance)
- Feedback Tests (Tachometer/Encoder)
-
Motor Disassembly
- Bearing and seal sizes are recorded
- Bearing fits are measured on shaft and End bell
- Brake torque is measured as well as resistance and Meg Ω
- More winding tests are performed (Surge and HiPOT tests)
- Stator is then washed and baked in oven
- Magnets are inspected for cracks or if loose on shaft
- Encoder is tested with either (Heidenhain PWM20, Sick PGT-11, or Mitchell Electronics equipment)
-
Assembly
- New bearings are installed
- New seals are installed
- If required, new windings are impregnated
- Brakes are rebuilt or replaced depending on manufacturer design.
- Rebuilt or New encoders are installed and aligned using:
- (Heidenhain PWM20, Sick PGT-11, or Mitchell Electronics equipment)
-
Rotor Balancing and Testing
- Rotor is run through a full vibration diagnostic
-
Run Testing
- Every Motor is Run for a minimum of 1 hour using one of our drives.
- We use Siemens S110, S120, IndraDrive, AB Kinetix 300, Yaskawa 7, and AMC drives
-
Service Report
- A Final 3-page Service Report is filled out
- Pinout diagram for power and feedback is provided
- Brake torque is recorded a final time for our Service Reports
- A photo of nameplate and motor is attached
- A motor tag is installed on motor with QR code linking Service Report and Job Histories
- If requested, a YouTube link is attached to the service report of motor
A&C Electric is a certified distributor service center.