open
Sort by:
Baldor L1205-50
$375.38
Baldor L1206-50
$456.90
Baldor L1208-50
$413.06
Baldor L1209-50
$573.35
Baldor L1304-50
$519.92
Baldor L1306-50
$502.79
Baldor L1307-50
$641.85
Baldor L1309-50
$528.82
Baldor L1313-50
$742.54
Baldor L1317-50
$989.14
Baldor L1318-50
$782.96
Baldor L1319-50
$902.15
Baldor L1405T-50
$1,048.74
Baldor L1408T-50
$1,133.68
Baldor L1508T-50
$1,773.47
Baldor EM2513T-58
$2,863.44
Baldor EM2515T-58
$3,141.02
Baldor EM3116-57
$631.30
Baldor EM3116T-57
$634.67
Baldor EM3154T-57
$674.42
Baldor EM3157T-57
$693.29
Baldor EM3211T-57
$793.00
Baldor EM3218T-57
$877.90
Baldor EM3311T-58
$1,240.37
Baldor EM3313T-58
$2,022.60
Baldor M3108-57
$435.92
Baldor M3112-57
$485.10
Baldor L1318TM
$698.68
Baldor L1321TM
$931.12
Baldor CEL11301
$533.62
Baldor CEL11303
$556.22
Baldor CEL11304
$594.58
Baldor CEL11307
$701.44
Baldor CEL11310
$802.82
Baldor EL11203
$464.43
Baldor EL11203M
$495.26
Baldor EL11204
$554.17
Baldor EL11205
$490.46
Baldor EL11206
$499.37
Baldor EL11206M
$530.19
Baldor EL11207
$591.16
Baldor EL11208
$521.97
Baldor EL11209
$560.33
Baldor EL11209M
$591.16
Baldor EL11300
$576.09
Baldor EL11301
$499.37
Baldor EL11301M
$530.19
Baldor EL11302
$591.16
Baldor EL11303
$521.97
Baldor EL11304
$560.33
Baldor EL11304A
$591.16
Baldor EL11305
$887.76
Baldor EL11306
$545.95
Baldor EL11306A
$576.09
Baldor EL11307
$667.88
Baldor EL11307A
$698.02
Baldor EL11307M
$698.02
Baldor EL11308
$999.42
Baldor EL11309
$640.48
Baldor EL11309A
$669.93
Baldor EL11313
$727.47
Baldor EL11313A
$758.30
Baldor EL11317
$804.19
Baldor EL11317A
$835.02
Baldor EL11318
$769.26
Baldor EL11318M
$798.71
Baldor EL11319
$915.85
Baldor EL11319M
$990.51
Baldor EL1319T
$1,017.23
Baldor EL1405T
$1,230.95
Baldor EL1406T
$1,296.02
Baldor EL1408T
$1,287.80
Servo Lab Capabilities
We have documented 96 different Servo Manufacturer repair reports in our Database
We repair AC Servos, DC Servos, AC Spindles, and AC Actuators
Capable of 24-hour repairs in many cases
We have thousands of spare and rebuilt motors in our inventory for parts or exchange motorsServo Lab Repair Procedures
-
Data
Motor nameplate data is recorded
-
Inspection
A visual inspection of any damage to the motor.
We check for- Damaged Leads/Terminals
- Worn output shaft/keyways
- Cracks in end bells or covers
-
Job Ticket
We complete to full write up off all motor data
Including- All winding tests (Resistance, Meg Ω, Continuity)
- All bearing sizes
- All seal sizes
- Brake torque tests (Record Torque, winding resistance)
- Feedback Tests (Tachometer/Encoder)
-
Motor Disassembly
- Bearing and seal sizes are recorded
- Bearing fits are measured on shaft and End bell
- Brake torque is measured as well as resistance and Meg Ω
- More winding tests are performed (Surge and HiPOT tests)
- Stator is then washed and baked in oven
- Magnets are inspected for cracks or if loose on shaft
- Encoder is tested with either (Heidenhain PWM20, Sick PGT-11, or Mitchell Electronics equipment)
-
Assembly
- New bearings are installed
- New seals are installed
- If required, new windings are impregnated
- Brakes are rebuilt or replaced depending on manufacturer design.
- Rebuilt or New encoders are installed and aligned using:
- (Heidenhain PWM20, Sick PGT-11, or Mitchell Electronics equipment)
-
Rotor Balancing and Testing
- Rotor is run through a full vibration diagnostic
-
Run Testing
- Every Motor is Run for a minimum of 1 hour using one of our drives.
- We use Siemens S110, S120, IndraDrive, AB Kinetix 300, Yaskawa 7, and AMC drives
-
Service Report
- A Final 3-page Service Report is filled out
- Pinout diagram for power and feedback is provided
- Brake torque is recorded a final time for our Service Reports
- A photo of nameplate and motor is attached
- A motor tag is installed on motor with QR code linking Service Report and Job Histories
- If requested, a YouTube link is attached to the service report of motor
A&C Electric is a certified distributor service center.