totally enclosed
Sort by:
Baldor SPM3709T
$1,771.34
Baldor SPM3710T
$1,423.24
Baldor SPM3711T
$1,795.58
Baldor SPM3713T
$2,533.64
Baldor SPM3714T
$1,606.84
Baldor SPM3910T
$2,796.06
Baldor SPM3914T
$3,335.06
Baldor SPNM3454
$394.37
Baldor SPNM3455
$544.18
Baldor SPNM3457
$381.88
Baldor SPNM3534
$441.37
Baldor SPNM3538
$511.87
Baldor SPNM3539
$778.45
Baldor SPNM3542
$550.06
Baldor SPNM3546
$892.28
Baldor SPNM3546T
$892.28
Baldor SPNM3554T
$991.42
Baldor VSPM3531
$606.38
Baldor VSPM3534
$452.09
Baldor VSPM3535
$681.16
Baldor VSPM3537
$470.95
Baldor VSPM3538
$737.76
Baldor VSPM3539
$737.76
Baldor VSPM3541
$515.42
Baldor VSPM3542
$530.92
Baldor VSPM3543
$752.58
Baldor VSPM3543T
$747.86
Baldor VSPM3545
$806.48
Baldor VSPM3546
$914.95
Baldor VSPM3546T
$830.06
Baldor VSPM3550
$909.56
Baldor VSPM3550T
$920.34
Baldor VSPM3554
$1,013.99
Baldor VSPM3554T
$918.32
Baldor VSPM3555
$992.43
Baldor VSPM3555T
$1,003.89
Baldor VSPM3556
$1,053.75
Baldor VSPM3556T
$1,065.20
Baldor VSPM3558T
$968.85
Baldor VSPM3610T
$1,146.72
Baldor VSPM3611T
$1,026.12
Baldor VSPM3613T
$1,262.61
Baldor VSPM3614T
$1,334.03
Baldor VSPM3615T
$1,057.79
Baldor VSPM3704T
$1,785.44
Baldor VSPM3708T
$1,997.00
Baldor VSPM3709T
$1,925.58
Baldor VSPM3710T
$1,560.41
Baldor VSPM3711T
$1,949.83
Baldor VSPM3713T
$2,688.26
Baldor VSPM3714T
$1,743.67
Baldor VSPNM3538
$637.37
Baldor VSPNM3542
$578.75
Baldor VSPNM3546
$923.04
Baldor VSPNM3546T
$923.04
Servo Lab Capabilities
We have documented 96 different Servo Manufacturer repair reports in our Database
We repair AC Servos, DC Servos, AC Spindles, and AC Actuators
Capable of 24-hour repairs in many cases
We have thousands of spare and rebuilt motors in our inventory for parts or exchange motorsServo Lab Repair Procedures
-
Data
Motor nameplate data is recorded
-
Inspection
A visual inspection of any damage to the motor.
We check for- Damaged Leads/Terminals
- Worn output shaft/keyways
- Cracks in end bells or covers
-
Job Ticket
We complete to full write up off all motor data
Including- All winding tests (Resistance, Meg Ω, Continuity)
- All bearing sizes
- All seal sizes
- Brake torque tests (Record Torque, winding resistance)
- Feedback Tests (Tachometer/Encoder)
-
Motor Disassembly
- Bearing and seal sizes are recorded
- Bearing fits are measured on shaft and End bell
- Brake torque is measured as well as resistance and Meg Ω
- More winding tests are performed (Surge and HiPOT tests)
- Stator is then washed and baked in oven
- Magnets are inspected for cracks or if loose on shaft
- Encoder is tested with either (Heidenhain PWM20, Sick PGT-11, or Mitchell Electronics equipment)
-
Assembly
- New bearings are installed
- New seals are installed
- If required, new windings are impregnated
- Brakes are rebuilt or replaced depending on manufacturer design.
- Rebuilt or New encoders are installed and aligned using:
- (Heidenhain PWM20, Sick PGT-11, or Mitchell Electronics equipment)
-
Rotor Balancing and Testing
- Rotor is run through a full vibration diagnostic
-
Run Testing
- Every Motor is Run for a minimum of 1 hour using one of our drives.
- We use Siemens S110, S120, IndraDrive, AB Kinetix 300, Yaskawa 7, and AMC drives
-
Service Report
- A Final 3-page Service Report is filled out
- Pinout diagram for power and feedback is provided
- Brake torque is recorded a final time for our Service Reports
- A photo of nameplate and motor is attached
- A motor tag is installed on motor with QR code linking Service Report and Job Histories
- If requested, a YouTube link is attached to the service report of motor
A&C Electric is a certified distributor service center.