totally enclosed
Sort by:
Baldor CSPM3534
$452.09
Baldor CSPM3537
$470.95
Baldor CSPM3538
$737.76
Baldor CSPM3539
$737.76
Baldor CSPM3541
$515.42
Baldor CSPM3542
$530.92
Baldor CSPM3543
$752.58
Baldor CSPM3545
$806.48
Baldor CSPM3546
$914.95
Baldor CSPM3546T
$830.06
Baldor CSPM3550
$909.56
Baldor CSPM3550T
$920.34
Baldor CSPM3554T
$918.32
Baldor CSPM3555
$992.43
Baldor CSPM3555T
$1,003.89
Baldor CSPM3556
$1,053.75
Baldor CSPM3556T
$1,065.20
Baldor CSPM3558T
$968.85
Baldor CSPM3607T
$1,276.08
Baldor CSPM3610T
$1,146.72
Baldor CSPM3611T
$1,026.12
Baldor CSPM3613T
$1,262.61
Baldor CSPM3614T
$1,334.03
Baldor CSPM3615T
$1,057.79
Baldor CSPM3704T
$1,785.44
Baldor CSPM3708T
$1,997.00
Baldor CSPM3709T
$1,925.58
Baldor CSPM3710T
$1,560.41
Baldor CSPM3711T
$1,949.83
Baldor CSPM3713T
$2,688.26
Baldor CSPM3714T
$1,743.67
Baldor CSPNM3538
$637.37
Baldor CSPNM3539
$789.64
Baldor CSPNM3542
$578.75
Baldor CSPNM3546
$923.04
Baldor SPM3454
$376.01
Baldor SPM3455
$591.18
Baldor SPM3458
$458.26
Baldor SPM3460
$442.84
Baldor SPM3461
$536.84
Baldor SPM3463
$487.63
Baldor SPM3464
$580.17
Baldor SPM3531
$585.31
Baldor SPM3534
$411.26
Baldor SPM3535
$658.01
Baldor SPM3537
$442.84
Baldor SPM3538
$708.68
Baldor SPM3539
$708.68
Baldor SPM3541
$487.63
Baldor SPM3542
$503.06
Baldor SPM3543
$723.37
Baldor SPM3543T
$723.37
Baldor SPM3545
$775.51
Baldor SPM3546
$792.40
Baldor SPM3546T
$792.40
Baldor SPM3550
$877.59
Baldor SPM3550T
$877.59
Baldor SPM3554
$880.53
Baldor SPM3554T
$880.53
Baldor SPM3555
$961.31
Baldor SPM3555T
$961.31
Baldor SPM3556
$1,023.00
Baldor SPM3556T
$1,023.00
Baldor SPM3558T
$931.20
Baldor SPM3607T
$1,196.32
Baldor SPM3610T
$1,066.33
Baldor SPM3611T
$955.44
Baldor SPM3613T
$1,182.36
Baldor SPM3614T
$1,254.33
Baldor SPM3615T
$987.02
Baldor SPM3704T
$1,631.07
Baldor SPM3708T
$1,843.31
Servo Lab Capabilities
We have documented 96 different Servo Manufacturer repair reports in our Database
We repair AC Servos, DC Servos, AC Spindles, and AC Actuators
Capable of 24-hour repairs in many cases
We have thousands of spare and rebuilt motors in our inventory for parts or exchange motorsServo Lab Repair Procedures
-
Data
Motor nameplate data is recorded
-
Inspection
A visual inspection of any damage to the motor.
We check for- Damaged Leads/Terminals
- Worn output shaft/keyways
- Cracks in end bells or covers
-
Job Ticket
We complete to full write up off all motor data
Including- All winding tests (Resistance, Meg Ω, Continuity)
- All bearing sizes
- All seal sizes
- Brake torque tests (Record Torque, winding resistance)
- Feedback Tests (Tachometer/Encoder)
-
Motor Disassembly
- Bearing and seal sizes are recorded
- Bearing fits are measured on shaft and End bell
- Brake torque is measured as well as resistance and Meg Ω
- More winding tests are performed (Surge and HiPOT tests)
- Stator is then washed and baked in oven
- Magnets are inspected for cracks or if loose on shaft
- Encoder is tested with either (Heidenhain PWM20, Sick PGT-11, or Mitchell Electronics equipment)
-
Assembly
- New bearings are installed
- New seals are installed
- If required, new windings are impregnated
- Brakes are rebuilt or replaced depending on manufacturer design.
- Rebuilt or New encoders are installed and aligned using:
- (Heidenhain PWM20, Sick PGT-11, or Mitchell Electronics equipment)
-
Rotor Balancing and Testing
- Rotor is run through a full vibration diagnostic
-
Run Testing
- Every Motor is Run for a minimum of 1 hour using one of our drives.
- We use Siemens S110, S120, IndraDrive, AB Kinetix 300, Yaskawa 7, and AMC drives
-
Service Report
- A Final 3-page Service Report is filled out
- Pinout diagram for power and feedback is provided
- Brake torque is recorded a final time for our Service Reports
- A photo of nameplate and motor is attached
- A motor tag is installed on motor with QR code linking Service Report and Job Histories
- If requested, a YouTube link is attached to the service report of motor
A&C Electric is a certified distributor service center.