open drip proof
Sort by:
Baldor CSPM2506T
$2,463.90
Baldor CSPM2511T
$3,097.23
Baldor CSPM2513T
$2,901.17
Baldor CSPM2514T
$3,264.99
Baldor CSPM2515T
$3,501.48
Baldor CSPM31104
$576.73
Baldor CSPM31107
$613.79
Baldor CSPM31108
$632.65
Baldor CSPM31112
$692.62
Baldor CSPM31115
$735.06
Baldor CSPM31155
$834.10
Baldor CSPM3116T
$894.07
Baldor CSPM3120T
$782.22
Baldor CSPM3154T
$932.47
Baldor CSPM3156T
$921.69
Baldor CSPM3157T
$995.80
Baldor CSPM3158T
$921.69
Baldor CSPM3207T
$1,108.99
Baldor CSPM3211T
$1,107.65
Baldor CSPM3212T
$1,040.27
Baldor CSPM3215T
$1,131.90
Baldor CSPM3218T
$1,206.01
Baldor CSPM3219T
$1,602.85
Baldor CSPM3305T
$1,518.63
Baldor CSPM3309T
$1,934.34
Baldor CSPM3311T
$1,834.62
Baldor CSPM3312T
$1,920.86
Baldor CSPM3313T
$2,182.95
Baldor CSPM3314T
$2,652.55
Baldor SPM2506T
$2,103.29
Baldor SPM2511T
$2,736.33
Baldor SPM2513T
$2,540.98
Baldor SPM2514T
$2,904.50
Baldor SPM2515T
$3,140.24
Baldor SPM30003
$516.27
Baldor SPM30004
$570.62
Baldor SPM30006
$541.98
Baldor SPM30007
$545.65
Baldor SPM30008
$597.06
Baldor SPM30009
$583.10
Baldor SPM30010
$600.73
Baldor SPM30011
$656.54
Baldor SPM30012
$580.17
Baldor SPM31101
$570.62
Baldor SPM31104
$545.65
Baldor SPM31105
$597.06
Baldor SPM31107
$583.10
Baldor SPM31108
$600.73
Baldor SPM31109
$656.54
Baldor SPM31111
$580.17
Baldor SPM31112
$661.68
Baldor SPM31115
$594.85
Baldor SPM31116
$696.20
Baldor SPM31120
$614.68
Baldor SPM31153
$807.83
Baldor SPM31154
$763.03
Baldor SPM31155
$691.79
Baldor SPM31156
$1,017.86
Baldor SPM31157
$800.48
Baldor SPM31158
$775.51
Baldor SPM31159
$979.67
Baldor SPM3116T
$763.03
Baldor SPM3120T
$740.26
Baldor SPM3153T
$708.68
Baldor SPM3154T
$798.28
Baldor SPM3155T
$868.05
Baldor SPM3156T
$879.06
Baldor SPM3157T
$854.83
Baldor SPM3158T
$879.06
Baldor SPM3207T
$1,028.88
Baldor SPM3211T
$921.66
Baldor SPM3212T
$959.84
Servo Lab Capabilities
We have documented 96 different Servo Manufacturer repair reports in our Database
We repair AC Servos, DC Servos, AC Spindles, and AC Actuators
Capable of 24-hour repairs in many cases
We have thousands of spare and rebuilt motors in our inventory for parts or exchange motorsServo Lab Repair Procedures
-
Data
Motor nameplate data is recorded
-
Inspection
A visual inspection of any damage to the motor.
We check for- Damaged Leads/Terminals
- Worn output shaft/keyways
- Cracks in end bells or covers
-
Job Ticket
We complete to full write up off all motor data
Including- All winding tests (Resistance, Meg Ω, Continuity)
- All bearing sizes
- All seal sizes
- Brake torque tests (Record Torque, winding resistance)
- Feedback Tests (Tachometer/Encoder)
-
Motor Disassembly
- Bearing and seal sizes are recorded
- Bearing fits are measured on shaft and End bell
- Brake torque is measured as well as resistance and Meg Ω
- More winding tests are performed (Surge and HiPOT tests)
- Stator is then washed and baked in oven
- Magnets are inspected for cracks or if loose on shaft
- Encoder is tested with either (Heidenhain PWM20, Sick PGT-11, or Mitchell Electronics equipment)
-
Assembly
- New bearings are installed
- New seals are installed
- If required, new windings are impregnated
- Brakes are rebuilt or replaced depending on manufacturer design.
- Rebuilt or New encoders are installed and aligned using:
- (Heidenhain PWM20, Sick PGT-11, or Mitchell Electronics equipment)
-
Rotor Balancing and Testing
- Rotor is run through a full vibration diagnostic
-
Run Testing
- Every Motor is Run for a minimum of 1 hour using one of our drives.
- We use Siemens S110, S120, IndraDrive, AB Kinetix 300, Yaskawa 7, and AMC drives
-
Service Report
- A Final 3-page Service Report is filled out
- Pinout diagram for power and feedback is provided
- Brake torque is recorded a final time for our Service Reports
- A photo of nameplate and motor is attached
- A motor tag is installed on motor with QR code linking Service Report and Job Histories
- If requested, a YouTube link is attached to the service report of motor
A&C Electric is a certified distributor service center.