Critical Cooling Motors
Sort by:
Baldor ECC101M0H10FF4
$2,816.74
Baldor ECC101M0H15FF4
$4,259.58
Baldor ECC101M0H5DF4
$1,829.81
Baldor ECC101M0H5EF4
$1,887.27
Baldor ECC101M0H7EF4
$2,495.68
Baldor ECC101M0H7FF4
$2,671.91
Baldor ECC101M4H20FF4
$5,063.38
Baldor HBAO2333T
$3,229.28
Baldor HBAO2334T
$3,505.52
Baldor HBAO2394T
$3,499.46
Baldor HBAO3581T
$1,006.58
Baldor HBAO3586T
$1,108.32
Baldor HBAO3587T
$1,069.24
Baldor HBAO3660T
$1,244.42
Baldor HBAO3661T
$1,196.58
Baldor HBAO3663T
$1,355.59
Baldor HBAO3665T
$1,286.86
Baldor HBAO3769T
$1,943.77
Baldor HBAO3770T
$1,784.76
Baldor HBAO3771T
$1,966.68
Baldor HBAO3774T
$1,981.50
Baldor HBAO4103T
$4,578.13
Baldor HBAO4104T
$5,351.60
Baldor HBAO4106T
$3,471.83
Baldor HBAO4108T
$5,294.33
Baldor HBAO4118T
$4,524.23
Baldor HBEM2276T
$3,277.12
Baldor HBEM2332T
$3,692.15
Baldor HBEM2333T
$2,996.17
Baldor HBEM2334T
$3,561.44
Baldor HBEM3545
$920.34
Baldor HBEM3546T
$1,005.24
Baldor HBEM3550T
$1,029.49
Baldor HBEM3554T
$1,037.58
Baldor HBEM3555T
$1,108.99
Baldor HBEM3556T
$1,166.94
Baldor HBEM3558T
$1,069.24
Baldor HBEM3559T
$1,197.25
Baldor HBEM3581T
$1,228.25
Baldor HBEM3582T
$1,354.91
Baldor HBEM3584T
$1,267.32
Baldor HBEM3587T
$1,320.55
Baldor HBEM3607T
$1,368.39
Baldor HBEM3611T
$1,195.91
Baldor HBEM3614T
$1,423.63
Baldor HBEM3615T
$1,286.86
Baldor HBEM3661T
$1,488.99
Baldor HBEM3664T
$1,615.65
Baldor HBEM3665T
$1,518.63
Baldor HBEM3667T
$1,592.75
Baldor HBEM3704T
$1,811.04
Baldor HBEM3708T
$2,011.82
Baldor HBEM3710T
$1,784.09
Baldor HBEM3714T
$1,981.50
Baldor HBEM3764T
$1,978.13
Baldor HBEM3768T
$2,263.13
Baldor HBEM3770T
$2,217.99
Baldor HBEM3774T
$2,401.25
Baldor HBEM4100T
$4,907.60
Baldor HBEM4102T
$6,389.85
Baldor HBEM4103T
$4,650.90
Baldor HBEM4104T
$5,435.82
Servo Lab Capabilities
We have documented 96 different Servo Manufacturer repair reports in our Database
We repair AC Servos, DC Servos, AC Spindles, and AC Actuators
Capable of 24-hour repairs in many cases
We have thousands of spare and rebuilt motors in our inventory for parts or exchange motorsServo Lab Repair Procedures
-
Data
Motor nameplate data is recorded
-
Inspection
A visual inspection of any damage to the motor.
We check for- Damaged Leads/Terminals
- Worn output shaft/keyways
- Cracks in end bells or covers
-
Job Ticket
We complete to full write up off all motor data
Including- All winding tests (Resistance, Meg Ω, Continuity)
- All bearing sizes
- All seal sizes
- Brake torque tests (Record Torque, winding resistance)
- Feedback Tests (Tachometer/Encoder)
-
Motor Disassembly
- Bearing and seal sizes are recorded
- Bearing fits are measured on shaft and End bell
- Brake torque is measured as well as resistance and Meg Ω
- More winding tests are performed (Surge and HiPOT tests)
- Stator is then washed and baked in oven
- Magnets are inspected for cracks or if loose on shaft
- Encoder is tested with either (Heidenhain PWM20, Sick PGT-11, or Mitchell Electronics equipment)
-
Assembly
- New bearings are installed
- New seals are installed
- If required, new windings are impregnated
- Brakes are rebuilt or replaced depending on manufacturer design.
- Rebuilt or New encoders are installed and aligned using:
- (Heidenhain PWM20, Sick PGT-11, or Mitchell Electronics equipment)
-
Rotor Balancing and Testing
- Rotor is run through a full vibration diagnostic
-
Run Testing
- Every Motor is Run for a minimum of 1 hour using one of our drives.
- We use Siemens S110, S120, IndraDrive, AB Kinetix 300, Yaskawa 7, and AMC drives
-
Service Report
- A Final 3-page Service Report is filled out
- Pinout diagram for power and feedback is provided
- Brake torque is recorded a final time for our Service Reports
- A photo of nameplate and motor is attached
- A motor tag is installed on motor with QR code linking Service Report and Job Histories
- If requested, a YouTube link is attached to the service report of motor
A&C Electric is a certified distributor service center.