round frame motor
Sort by:
Baldor CD2003P-2
$11,598.93
Baldor CD2005P-2
$11,776.97
Baldor CD2007P-2
$13,458.37
Baldor CD2010P-2
$13,938.66
Baldor CD2015P-2
$15,820.25
Baldor CDMG2310
$14,177.62
Baldor CDMG2315
$20,750.53
Baldor CDMG2320
$23,164.64
Baldor CDMG2325
$25,204.48
Baldor CDMG2333
$31,619.93
Baldor D2005P
$11,319.62
Baldor D2007P
$13,187.76
Baldor D2010P
$13,432.26
Baldor D2015P
$15,034.54
Baldor D2020P
$15,840.03
Baldor D2025P
$19,519.35
Baldor D2030P
$19,519.35
Baldor D2040P-BV
$30,406.16
Baldor D2050P-BV
$32,146.91
Baldor D2060P2-BV
$39,348.86
Baldor D2075P2-BV
$41,089.61
Baldor D2505P
$13,009.73
Baldor D2507P
$15,308.31
Baldor D2510P
$17,257.16
Baldor D2515P
$22,257.86
Baldor D2520P
$29,314.23
Baldor D2525P
$31,054.98
Baldor D5005P
$11,319.62
Baldor D5007P
$13,187.76
Baldor D50100P
$47,243.96
Baldor D50100P2-BV
$49,697.62
Baldor D5010P
$13,432.26
Baldor D50125P
$54,335.93
Baldor D50125P2-BV
$51,563.39
Baldor D50150P
$67,746.03
Baldor D50150P2-BV
$62,822.09
Baldor D5015P
$15,034.54
Baldor D50200P
$73,249.18
Baldor D50200P2-BV
$73,606.82
Baldor D5020P
$15,840.03
Baldor D50250P
$87,107.13
Baldor D50250P2-BV
$77,123.93
Baldor D5025P
$19,519.35
Baldor D50300P2-BV
$88,759.26
Baldor D5030P
$19,519.35
Baldor D50400P2-BV
$110,269.39
Baldor D5040P
$26,124.70
Baldor D5040P-BV
$30,406.16
Baldor D50500P2-BV
$135,807.78
Baldor D5050P
$26,124.70
Baldor D5050P-BV
$32,146.91
Baldor D5060P
$35,029.43
Baldor D5060P-BV
$39,348.86
Baldor D5075P
$35,029.43
Baldor D5075P-BV
$41,089.61
Baldor D5505P
$13,009.73
Baldor D5507P
$15,308.31
Baldor D5510P
$17,257.16
Baldor D5515P
$22,257.86
Baldor D5520P
$29,314.23
Baldor D5525P
$31,054.98
Baldor DMG2305
$13,270.85
Baldor DMG2307
$13,534.33
Baldor DMG2310
$13,901.47
Baldor DMG2315
$20,021.00
Baldor DMG2320
$22,166.08
Baldor DMG2325
$23,966.17
Baldor DMG2333
$30,391.12
Baldor DMG2340
$33,314.00
Servo Lab Capabilities
We have documented 96 different Servo Manufacturer repair reports in our Database
We repair AC Servos, DC Servos, AC Spindles, and AC Actuators
Capable of 24-hour repairs in many cases
We have thousands of spare and rebuilt motors in our inventory for parts or exchange motorsServo Lab Repair Procedures
-
Data
Motor nameplate data is recorded
-
Inspection
A visual inspection of any damage to the motor.
We check for- Damaged Leads/Terminals
- Worn output shaft/keyways
- Cracks in end bells or covers
-
Job Ticket
We complete to full write up off all motor data
Including- All winding tests (Resistance, Meg Ω, Continuity)
- All bearing sizes
- All seal sizes
- Brake torque tests (Record Torque, winding resistance)
- Feedback Tests (Tachometer/Encoder)
-
Motor Disassembly
- Bearing and seal sizes are recorded
- Bearing fits are measured on shaft and End bell
- Brake torque is measured as well as resistance and Meg Ω
- More winding tests are performed (Surge and HiPOT tests)
- Stator is then washed and baked in oven
- Magnets are inspected for cracks or if loose on shaft
- Encoder is tested with either (Heidenhain PWM20, Sick PGT-11, or Mitchell Electronics equipment)
-
Assembly
- New bearings are installed
- New seals are installed
- If required, new windings are impregnated
- Brakes are rebuilt or replaced depending on manufacturer design.
- Rebuilt or New encoders are installed and aligned using:
- (Heidenhain PWM20, Sick PGT-11, or Mitchell Electronics equipment)
-
Rotor Balancing and Testing
- Rotor is run through a full vibration diagnostic
-
Run Testing
- Every Motor is Run for a minimum of 1 hour using one of our drives.
- We use Siemens S110, S120, IndraDrive, AB Kinetix 300, Yaskawa 7, and AMC drives
-
Service Report
- A Final 3-page Service Report is filled out
- Pinout diagram for power and feedback is provided
- Brake torque is recorded a final time for our Service Reports
- A photo of nameplate and motor is attached
- A motor tag is installed on motor with QR code linking Service Report and Job Histories
- If requested, a YouTube link is attached to the service report of motor
A&C Electric is a certified distributor service center.