Free Repair Quotes

Repairs and Service For

Dirty Duty Plus

New ABB Motors » Dirty Duty Plus

Sort by:

Baldor CDM3537 $699.19

Baldor CDM3538 $727.44

Baldor CDM3539 $943.55

Baldor CDM3542 $755.69

Baldor CDM3543 $956.97

Baldor CEDM3545 $1,007.11

Baldor CEDM3546 $1,114.46

Baldor CEDM3550 $1,101.04

Baldor CEDM3554 $1,205.57

Baldor CEDM3554T $1,216.87

Baldor CEDM3555 $1,178.03

Baldor CEDM3556 $1,245.83

Baldor CEDM3558 $1,257.83

Baldor CEDM3558T $1,269.13

Baldor CEDM3559T $1,262.07

Baldor CEDM3611T $1,401.20

Baldor CEDM3613T $1,498.66

Baldor CEDM3615T $1,432.98

Baldor CEDM3704T $2,156.89

Baldor CEDM3708T $2,351.11

Baldor CEDM3709T $2,285.43

Baldor CEDM3710T $2,131.46

Baldor CEDM3711T $2,308.03

Baldor CEDM3714T $2,321.44

Baldor CNDM3538 $727.44

Baldor CNDM3542 $755.69

Baldor CNEDM3546 $1,114.46

Baldor CNEDM3546T $1,125.76

Baldor CNEDM3554T $1,216.87

Baldor DM3538 $694.95

Baldor DM3542 $726.03

Baldor EDM3546 $1,083.39

Baldor VDM3537 $692.83

Baldor VDM3538 $716.84

Baldor VDM3541 $732.38

Baldor VDM3542 $745.80

Baldor VEDM3545 $1,007.11

Baldor VEDM3546 $1,114.46

Baldor VEDM3550 $1,101.04

Baldor VEDM3554 $1,205.57

Baldor VEDM3555 $1,205.57

Baldor VEDM3555T $1,294.56

Baldor VEDM3558 $1,257.83

Baldor VEDM3558T $1,269.13

Baldor VEDM3559T $1,335.52

Baldor VEDM3611T $1,401.20

Baldor VEDM3615T $1,432.98

Baldor VEDM3710T $2,131.46

Baldor VEDM3714T $2,321.44

Baldor VNDM3538 $716.84

Baldor VNDM3542 $745.80

Baldor VNEDM3546 $1,114.46

Baldor VNEDM3546T $1,125.76

Baldor VNEDM3554 $1,205.57

Baldor VNEDM3554T $1,216.87

Servo Lab Capabilities

We have documented 96 different Servo Manufacturer repair reports in our Database

We repair AC Servos, DC Servos, AC Spindles, and AC Actuators

Capable of 24-hour repairs in many cases

We have thousands of spare and rebuilt motors in our inventory for parts or exchange motors

Servo Lab Repair Procedures

Data

Motor nameplate data is recorded

Inspection

A visual inspection of any damage to the motor.

We check for

Damaged Leads/Terminals
Worn output shaft/keyways
Cracks in end bells or covers

Job Ticket

We complete to full write up off all motor data

Including

All winding tests (Resistance, Meg Ω, Continuity)
All bearing sizes
All seal sizes
Brake torque tests (Record Torque, winding resistance)
Feedback Tests (Tachometer/Encoder)

Motor Disassembly

Bearing and seal sizes are recorded
Bearing fits are measured on shaft and End bell
Brake torque is measured as well as resistance and Meg Ω
More winding tests are performed (Surge and HiPOT tests)
Stator is then washed and baked in oven
Magnets are inspected for cracks or if loose on shaft
Encoder is tested with either (Heidenhain PWM20, Sick PGT-11, or Mitchell Electronics equipment)

Assembly

New bearings are installed
New seals are installed
If required, new windings are impregnated
Brakes are rebuilt or replaced depending on manufacturer design.
Rebuilt or New encoders are installed and aligned using:
(Heidenhain PWM20, Sick PGT-11, or Mitchell Electronics equipment)

Rotor Balancing and Testing

Rotor is run through a full vibration diagnostic

Run Testing

Every Motor is Run for a minimum of 1 hour using one of our drives.
We use Siemens S110, S120, IndraDrive, AB Kinetix 300, Yaskawa 7, and AMC drives

Service Report

A Final 3-page Service Report is filled out
Pinout diagram for power and feedback is provided
Brake torque is recorded a final time for our Service Reports
A photo of nameplate and motor is attached
A motor tag is installed on motor with QR code linking Service Report and Job Histories
If requested, a YouTube link is attached to the service report of motor

Electrical Apparatus Service Association

A&C Electric is a certified distributor service center.