open
Sort by:
Baldor SPJMM2506T
$2,966.52
Baldor SPJMM2511T
$3,599.85
Baldor SPJMM2513T
$3,120.14
Baldor SPJMM2513T-G
$3,483.96
Baldor SPJMM2514T
$3,377.51
Baldor SPJMM2514T-G
$3,682.04
Baldor SPJMM2515T
$3,637.58
Baldor SPJMM2515T-G
$3,942.11
Baldor SPJMM3116T
$878.57
Baldor SPJMM3116T-G
$1,085.41
Baldor SPJMM3120T
$922.36
Baldor SPJMM3154T
$950.66
Baldor SPJMM3154T-G
$1,156.83
Baldor SPJMM3155T
$1,051.05
Baldor SPJMM3157T
$1,011.97
Baldor SPJMM3157T-G
$1,246.44
Baldor SPJMM3158T
$1,148.74
Baldor SPJMM3158T-G
$1,349.52
Baldor SPJMM3211T
$1,150.77
Baldor SPJMM3211T-G
$1,408.81
Baldor SPJMM3212T
$1,270.02
Baldor SPJMM3212T-G
$1,621.04
Baldor SPJMM3218T
$1,265.98
Baldor SPJMM3218T-G
$1,517.96
Baldor SPJMM3219T
$1,832.60
Baldor SPJMM3219T-G
$1,921.54
Baldor SPJMM3309T
$2,158.70
Baldor SPJMM3311T
$1,879.09
Baldor SPJMM3311T-G
$2,213.94
Baldor SPJMM3312T
$2,145.22
Baldor SPJMM3312T-G
$2,399.22
Baldor SPJMM3313T
$2,110.19
Baldor SPJMM3313T-G
$2,434.26
Baldor SPJMM3314T
$2,876.91
Baldor SPJMM3314T-G
$3,080.39
Baldor SPJPM2513T
$3,120.14
Baldor SPJPM2514T
$3,377.51
Baldor SPJPM2515T
$3,637.58
Baldor SPJPM3116T
$1,042.29
Baldor SPJPM3154T
$1,080.70
Baldor SPJPM3157T
$1,144.70
Baldor SPJPM3158T
$1,148.74
Baldor SPJPM3211T
$1,346.83
Baldor SPJPM3212T
$1,270.02
Baldor SPJPM3218T
$1,445.87
Baldor SPJPM3219T
$1,832.60
Baldor SPJPM3311T
$2,073.80
Baldor SPJPM3312T
$2,145.22
Baldor SPJPM3313T
$2,110.19
Baldor SPJPM3314T
$2,876.91
Baldor VSPJMM3116T
$878.57
Baldor VSPJMM3154T
$925.06
Baldor VSPJMM3157T
$1,011.97
Baldor VSPJMM3158T
$1,148.74
Baldor VSPJMM3211T
$1,119.77
Baldor VSPJMM3212T
$1,270.02
Baldor VSPJMM3218T
$1,265.98
Baldor VSPJMM3219T
$1,832.60
Baldor VSPJMM3311T
$1,879.09
Baldor VSPJMM3312T
$2,145.22
Baldor VSPJMM3313T
$2,053.59
Baldor VSPJMM3314T
$2,876.91
Servo Lab Capabilities
We have documented 96 different Servo Manufacturer repair reports in our Database
We repair AC Servos, DC Servos, AC Spindles, and AC Actuators
Capable of 24-hour repairs in many cases
We have thousands of spare and rebuilt motors in our inventory for parts or exchange motorsServo Lab Repair Procedures
-
Data
Motor nameplate data is recorded
-
Inspection
A visual inspection of any damage to the motor.
We check for- Damaged Leads/Terminals
- Worn output shaft/keyways
- Cracks in end bells or covers
-
Job Ticket
We complete to full write up off all motor data
Including- All winding tests (Resistance, Meg Ω, Continuity)
- All bearing sizes
- All seal sizes
- Brake torque tests (Record Torque, winding resistance)
- Feedback Tests (Tachometer/Encoder)
-
Motor Disassembly
- Bearing and seal sizes are recorded
- Bearing fits are measured on shaft and End bell
- Brake torque is measured as well as resistance and Meg Ω
- More winding tests are performed (Surge and HiPOT tests)
- Stator is then washed and baked in oven
- Magnets are inspected for cracks or if loose on shaft
- Encoder is tested with either (Heidenhain PWM20, Sick PGT-11, or Mitchell Electronics equipment)
-
Assembly
- New bearings are installed
- New seals are installed
- If required, new windings are impregnated
- Brakes are rebuilt or replaced depending on manufacturer design.
- Rebuilt or New encoders are installed and aligned using:
- (Heidenhain PWM20, Sick PGT-11, or Mitchell Electronics equipment)
-
Rotor Balancing and Testing
- Rotor is run through a full vibration diagnostic
-
Run Testing
- Every Motor is Run for a minimum of 1 hour using one of our drives.
- We use Siemens S110, S120, IndraDrive, AB Kinetix 300, Yaskawa 7, and AMC drives
-
Service Report
- A Final 3-page Service Report is filled out
- Pinout diagram for power and feedback is provided
- Brake torque is recorded a final time for our Service Reports
- A photo of nameplate and motor is attached
- A motor tag is installed on motor with QR code linking Service Report and Job Histories
- If requested, a YouTube link is attached to the service report of motor
A&C Electric is a certified distributor service center.