Free Repair Quotes

Repairs and Service For

Severe Duty XEX

New ABB Motors » Severe Duty XEX

Sort by:

Baldor VECP3771T-4 $2,719.77

Baldor VECP3774T $2,577.81

Baldor VECP3774T-4 $2,577.81

Baldor VECP4100T $5,557.48

Baldor VECP4102T $7,253.19

Baldor VECP4103T $5,109.01

Baldor VECP4111T $7,633.86

Baldor ECP5010002-PP4 $85,000.75

Baldor ECP5010004-PP4 $72,722.29

Baldor ECP502506-PP4 $32,321.83

Baldor ECP503002-PP4 $31,643.28

Baldor ECP503004-PP4 $29,695.74

Baldor ECP503006-PP4 $37,941.62

Baldor ECP503008-PP4 $45,189.04

Baldor ECP503502-PP4 $35,178.03

Baldor ECP503504-PP4 $33,275.39

Baldor ECP503506-PP4 $40,859.00

Baldor ECP503508-PP4 $49,172.24

Baldor ECP504002-PP4 $38,360.32

Baldor ECP504004-PP4 $36,368.44

Baldor ECP504006-PP4 $45,256.39

Baldor ECP504008-PP4 $53,418.09

Baldor ECP504502-PP4 $42,499.53

Baldor ECP504504-PP4 $40,210.76

Baldor ECP504506-PP4 $48,209.69

Baldor ECP504508-PP4 $55,307.26

Baldor ECP505002-PP4 $46,441.19

Baldor ECP505004-PP4 $44,504.32

Baldor ECP505006-PP4 $50,248.71

Baldor ECP505008-PP4 $58,888.60

Baldor ECP506002-PP4 $49,934.97

Baldor ECP506004-PP4 $47,313.38

Baldor ECP506006-PP4 $52,544.23

Baldor ECP507002-PP4 $57,478.74

Baldor ECP507004-PP4 $54,204.96

Baldor ECP507006-PP4 $59,009.83

Baldor ECP508002-PP4 $70,348.76

Baldor ECP508004-PP4 $60,452.24

Baldor ECP509002-PP4 $77,634.35

Baldor ECP509004-PP4 $62,757.85

Servo Lab Capabilities

We have documented 96 different Servo Manufacturer repair reports in our Database

We repair AC Servos, DC Servos, AC Spindles, and AC Actuators

Capable of 24-hour repairs in many cases

We have thousands of spare and rebuilt motors in our inventory for parts or exchange motors

Servo Lab Repair Procedures

Data

Motor nameplate data is recorded

Inspection

A visual inspection of any damage to the motor.

We check for

Damaged Leads/Terminals
Worn output shaft/keyways
Cracks in end bells or covers

Job Ticket

We complete to full write up off all motor data

Including

All winding tests (Resistance, Meg Ω, Continuity)
All bearing sizes
All seal sizes
Brake torque tests (Record Torque, winding resistance)
Feedback Tests (Tachometer/Encoder)

Motor Disassembly

Bearing and seal sizes are recorded
Bearing fits are measured on shaft and End bell
Brake torque is measured as well as resistance and Meg Ω
More winding tests are performed (Surge and HiPOT tests)
Stator is then washed and baked in oven
Magnets are inspected for cracks or if loose on shaft
Encoder is tested with either (Heidenhain PWM20, Sick PGT-11, or Mitchell Electronics equipment)

Assembly

New bearings are installed
New seals are installed
If required, new windings are impregnated
Brakes are rebuilt or replaced depending on manufacturer design.
Rebuilt or New encoders are installed and aligned using:
(Heidenhain PWM20, Sick PGT-11, or Mitchell Electronics equipment)

Rotor Balancing and Testing

Rotor is run through a full vibration diagnostic

Run Testing

Every Motor is Run for a minimum of 1 hour using one of our drives.
We use Siemens S110, S120, IndraDrive, AB Kinetix 300, Yaskawa 7, and AMC drives

Service Report

A Final 3-page Service Report is filled out
Pinout diagram for power and feedback is provided
Brake torque is recorded a final time for our Service Reports
A photo of nameplate and motor is attached
A motor tag is installed on motor with QR code linking Service Report and Job Histories
If requested, a YouTube link is attached to the service report of motor

Electrical Apparatus Service Association

A&C Electric is a certified distributor service center.