Free Repair Quotes
x
Search
Repairs and Service For

Close-coupled pump

New ABB Motors » Close-coupled pump
Sort by:
Baldor EWCM3714T $1,992.28
Baldor VEJMM2333T $3,657.79
Baldor VEJMM2333T-5 $3,350.56
Baldor VEJMM2334T $3,894.28
Baldor VEJMM2334T-5 $3,894.28
Baldor VEJMM3116T $784.25
Baldor VEJMM3116T-5 $784.25
Baldor VEJMM3154T $840.84
Baldor VEJMM3154T-5 $840.84
Baldor VEJMM3157T $919.67
Baldor VEJMM3157T-5 $919.67
Baldor VEJMM3158T $974.24
Baldor VEJMM3211T $1,009.28
Baldor VEJMM3211T-5 $1,009.28
Baldor VEJMM3212T $1,164.91
Baldor VEJMM3218T $1,142.68
Baldor VEJMM3218T-5 $1,142.68
Baldor VEJMM3219T $1,681.01
Baldor VEJMM3311T $1,724.13
Baldor VEJMM3312T $1,968.02
Baldor VEJMM3313T $1,866.29
Baldor VEJMM3314T $2,639.08
Baldor VEJMM3546T $766.73
Baldor VEJMM3546T-5 $986.37
Baldor VEJMM3554T $808.50
Baldor VEJMM3554T-5 $1,077.33
Baldor VEJMM3558T $968.85
Baldor VEJMM3558T-5 $1,129.21
Baldor VEJMM3611T $1,104.95
Baldor VEJMM3611T-5 $1,271.37
Baldor VEJMM3615T $1,303.71
Baldor VEJMM3615T-5 $1,303.71
Baldor VEJMM3709T $1,995.65
Baldor VEJMM3710T $1,866.29
Baldor VEJMM3710T-5 $1,841.36
Baldor VEJMM3714T $2,161.39
Baldor VEJMM3714T-5 $2,031.36
Baldor EJPM4313T $13,293.76
Baldor EJPM4316T $12,717.71
Baldor JML1406T $1,198.07
Baldor JML1408T $1,372.74
Baldor JML1409T $1,690.58
Baldor JML1508T $1,948.14
Baldor JML1509T $2,424.90
Baldor JML1510T $2,565.33
Baldor JML1511T $2,982.49
Baldor JML1512T $3,174.98
Baldor JML3606T $1,255.61
Baldor JML3608T $1,672.77
Baldor JPL1406T $1,198.07
Baldor JPL1408T $1,372.74
Baldor JPL1409T $1,690.58
Baldor JPL1508T $1,948.14
Baldor JPL1509T $2,424.90
Baldor JPL1510T $2,565.33
Baldor JPL1511T $2,982.49
Baldor JPL1512T $3,174.98
Baldor WCL1406T $1,205.60
Baldor WCL1408T $1,383.02
Baldor WCL1409T $1,706.34
Baldor WCL1508T $1,964.58
Baldor WCL1509T $2,440.66
Baldor WCL1511T $3,010.58
Baldor EJMM2333T $3,399.07
Baldor EJMM2333T-5 $3,350.56
Baldor EJMM2333T-G $3,724.49
Baldor EJMM2334T $3,894.28
Baldor EJMM2334T-G $4,160.41
Baldor EJMM2394T $3,587.72
Baldor EJMM2394T-5 $3,587.72
Baldor EJMM2394T-G $3,754.14
Baldor EJMM2506T $2,721.28
«1234»

Servo Lab Capabilities

We have documented 96 different Servo Manufacturer repair reports in our Database
We repair AC Servos, DC Servos, AC Spindles, and AC Actuators
Capable of 24-hour repairs in many cases
We have thousands of spare and rebuilt motors in our inventory for parts or exchange motors

Servo Lab Repair Procedures

  1. Data

    Motor nameplate data is recorded

  2. Inspection

    A visual inspection of any damage to the motor.

    We check for
    • Damaged Leads/Terminals
    • Worn output shaft/keyways
    • Cracks in end bells or covers
  3. Job Ticket

    We complete to full write up off all motor data

    Including
    • All winding tests (Resistance, Meg Ω, Continuity)
    • All bearing sizes
    • All seal sizes
    • Brake torque tests (Record Torque, winding resistance)
    • Feedback Tests (Tachometer/Encoder)
  4. Motor Disassembly

    • Bearing and seal sizes are recorded
    • Bearing fits are measured on shaft and End bell
    • Brake torque is measured as well as resistance and Meg Ω
    • More winding tests are performed (Surge and HiPOT tests)
    • Stator is then washed and baked in oven
    • Magnets are inspected for cracks or if loose on shaft
    • Encoder is tested with either (Heidenhain PWM20, Sick PGT-11, or Mitchell Electronics equipment)
  5. Assembly

    • New bearings are installed
    • New seals are installed
    • If required, new windings are impregnated
    • Brakes are rebuilt or replaced depending on manufacturer design.
    • Rebuilt or New encoders are installed and aligned using:
    • (Heidenhain PWM20, Sick PGT-11, or Mitchell Electronics equipment)
  6. Rotor Balancing and Testing

    • Rotor is run through a full vibration diagnostic
  7. Run Testing

    • Every Motor is Run for a minimum of 1 hour using one of our drives.
    • We use Siemens S110, S120, IndraDrive, AB Kinetix 300, Yaskawa 7, and AMC drives
  8. Service Report

    • A Final 3-page Service Report is filled out
    • Pinout diagram for power and feedback is provided
    • Brake torque is recorded a final time for our Service Reports
    • A photo of nameplate and motor is attached
    • A motor tag is installed on motor with QR code linking Service Report and Job Histories
    • If requested, a YouTube link is attached to the service report of motor
ISO 9001:2000 Registered Electrical Apparatus Service Association
A&C Electric is a certified distributor service center.

A&C Electric Company specializes in servo motor repairs, industrial motor repairs, motor refurbishing and new motor sales. Save money on motor repairs and reduce your downtime with fast send-in comprehensive industrial and electric motor testing and motor repairs. A&C Electric Company services Harrison Township MI, Detroit MI, Warren MI, Lansing MI, Clinton Township MI, Flint MI, Ann Arbor MI, Troy MI, Grand Rapids MI and Toledo OH.

© 2026 A&C Electric Company.All Rights Reserved
41225 Irwin Rd, Harrison Township, MI 48045 USA
Please enable Javascript for full website functionality.