Jet Pump
Sort by:
Baldor CJL1205A
$374.70
Baldor CJL1301A
$560.33
Baldor CJL1303A
$387.71
Baldor CJL1304A
$633.63
Baldor CJL1306A
$495.26
Baldor CJL1307A
$726.10
Baldor CJL1309A
$507.59
Baldor CJL1313A
$704.18
Baldor CJL1317A
$941.88
Baldor CJL3501A
$513.07
Baldor CJL3504A
$604.86
Baldor CJL3507A
$736.38
Baldor CJL3509A
$745.28
Baldor CJL3513A
$818.58
Baldor CJL3515A
$962.43
Baldor JL1205A
$328.12
Baldor JL1301A
$378.12
Baldor JL1303A
$368.53
Baldor JL1304A
$444.57
Baldor JL1306A
$484.98
Baldor JL1307A
$560.33
Baldor JL1309A
$502.79
Baldor JL1313A
$701.44
Baldor JL1317A
$865.16
Baldor JL1323A
$887.76
Baldor JL3405A
$380.18
Baldor JL3501A
$474.71
Baldor JL3503A
$435.66
Baldor JL3504A
$551.43
Baldor JL3506A
$518.55
Baldor JL3507A
$654.18
Baldor JL3509A
$633.63
Baldor JL3510A
$751.45
Baldor JL3513A
$751.45
Baldor JL3514A
$823.37
Baldor JL3515A
$882.28
Baldor JL3516A
$937.08
Baldor CJM3104
$425.14
Baldor CJM3107
$389.43
Baldor CJM3108
$474.99
Baldor CJM3111
$444.68
Baldor CJM3112
$509.36
Baldor CJM3115
$497.23
Baldor CJM3120
$605.70
Baldor CJM3155
$720.24
Baldor CJM3158
$852.29
Baldor CJM3538
$526.87
Baldor CJM3542
$557.87
Baldor EJM3545
$722.26
Baldor EJM3545-5
$722.26
Baldor EJM3546
$830.06
Baldor EJM3550
$816.59
Baldor EJM3554
$921.02
Baldor EJM3555
$893.39
Baldor EJM3555-5
$893.39
Baldor EJM3558
$972.90
Baldor EJM3559
$977.61
Baldor EJM3559-5
$977.61
Baldor JM3006
$355.07
Baldor JM3107
$375.28
Baldor JM3108
$448.04
Baldor JM3111
$444.68
Baldor JM3112
$494.53
Baldor JM3115
$494.53
Baldor JM3116
$542.37
Baldor JM3120
$590.21
Baldor JM3154
$645.45
Baldor JM3155
$701.37
Baldor JM3158
$832.08
Baldor JM3457
$389.43
Baldor JM3458
$421.77
Baldor JM3460
$421.77
Servo Lab Capabilities
We have documented 96 different Servo Manufacturer repair reports in our Database
We repair AC Servos, DC Servos, AC Spindles, and AC Actuators
Capable of 24-hour repairs in many cases
We have thousands of spare and rebuilt motors in our inventory for parts or exchange motorsServo Lab Repair Procedures
-
Data
Motor nameplate data is recorded
-
Inspection
A visual inspection of any damage to the motor.
We check for- Damaged Leads/Terminals
- Worn output shaft/keyways
- Cracks in end bells or covers
-
Job Ticket
We complete to full write up off all motor data
Including- All winding tests (Resistance, Meg Ω, Continuity)
- All bearing sizes
- All seal sizes
- Brake torque tests (Record Torque, winding resistance)
- Feedback Tests (Tachometer/Encoder)
-
Motor Disassembly
- Bearing and seal sizes are recorded
- Bearing fits are measured on shaft and End bell
- Brake torque is measured as well as resistance and Meg Ω
- More winding tests are performed (Surge and HiPOT tests)
- Stator is then washed and baked in oven
- Magnets are inspected for cracks or if loose on shaft
- Encoder is tested with either (Heidenhain PWM20, Sick PGT-11, or Mitchell Electronics equipment)
-
Assembly
- New bearings are installed
- New seals are installed
- If required, new windings are impregnated
- Brakes are rebuilt or replaced depending on manufacturer design.
- Rebuilt or New encoders are installed and aligned using:
- (Heidenhain PWM20, Sick PGT-11, or Mitchell Electronics equipment)
-
Rotor Balancing and Testing
- Rotor is run through a full vibration diagnostic
-
Run Testing
- Every Motor is Run for a minimum of 1 hour using one of our drives.
- We use Siemens S110, S120, IndraDrive, AB Kinetix 300, Yaskawa 7, and AMC drives
-
Service Report
- A Final 3-page Service Report is filled out
- Pinout diagram for power and feedback is provided
- Brake torque is recorded a final time for our Service Reports
- A photo of nameplate and motor is attached
- A motor tag is installed on motor with QR code linking Service Report and Job Histories
- If requested, a YouTube link is attached to the service report of motor
A&C Electric is a certified distributor service center.