general purpose
Sort by:
Baldor BL3516
$1,060.38
Baldor BL3517
$1,117.92
Baldor BL3518
$1,212.45
Baldor KBL3406
$1,174.09
Baldor KBL3409
$1,287.80
Baldor VBL3507
$1,672.77
Baldor VBL3510
$1,772.10
Baldor VBL3510T
$1,772.10
Baldor BM3538
$1,101.58
Baldor BM3539
$1,517.96
Baldor BM3542
$1,288.88
Baldor BM3543
$1,593.42
Baldor BM3569
$1,013.99
Baldor CEBM3546T
$1,742.99
Baldor CEBM3554T
$1,877.07
Baldor CEBM3558T
$1,930.29
Baldor CEBM3611T
$2,158.02
Baldor CEBM3615T
$2,528.58
Baldor CEBM3710T
$4,636.07
Baldor CEBM3714T
$5,055.82
Baldor EBM2333T
$7,555.43
Baldor EBM2334T
$9,803.06
Baldor EBM3546
$1,747.71
Baldor EBM3546T
$1,782.74
Baldor EBM3554T
$2,007.10
Baldor EBM3554Y
$1,833.95
Baldor EBM3558T
$2,106.82
Baldor EBM3611T
$2,657.27
Baldor EBM3615T
$3,221.87
Baldor EBM3710T
$4,249.34
Baldor EBM3714T
$5,340.82
Baldor EBM4103T
$12,383.53
Baldor EBM4104T
$13,964.82
Baldor KBM3454
$952.01
Baldor KBM3458
$1,011.97
Baldor VBM3538
$1,127.18
Baldor VBM3542
$1,320.55
Baldor VBM3542-5
$1,320.55
Baldor VEBM3546
$1,519.98
Baldor VEBM3546T
$1,742.99
Baldor VEBM3546T-5
$1,742.99
Baldor VEBM3554
$1,825.19
Baldor VEBM3554T
$1,877.07
Baldor VEBM3554T-5
$1,877.07
Baldor VEBM3558
$1,879.09
Baldor VEBM3558T
$1,930.29
Baldor VEBM3558T-5
$1,930.29
Baldor VEBM3611T
$2,158.02
Baldor VEBM3611T-5
$2,158.02
Baldor VEBM3615T
$2,528.58
Baldor VEBM3710T
$4,636.07
Baldor VEBM3714T
$5,055.82
Baldor VEBNM3538
$1,590.72
Baldor VEBNM3542
$1,788.13
Baldor BM3108
$1,007.26
Baldor BM3112
$1,173.00
Baldor BM3116
$1,314.49
Baldor EBM2513T
$6,143.25
Baldor EBM3116T
$1,532.11
Baldor EBM3154T
$1,700.55
Baldor EBM3157T
$1,940.40
Baldor EBM3211T
$2,381.03
Baldor EBM3218T
$2,942.27
Baldor EBM3248T
$2,528.58
Baldor EBM3311T
$3,697.54
Baldor EBM3313T
$4,637.42
Baldor VBM3108
$1,061.83
Baldor VBM3112
$1,233.64
Baldor VBM3116
$1,343.46
Baldor VBM3154
$1,561.08
Baldor VEBM3116T
$1,712.00
Baldor VEBM3154T
$1,788.13
Servo Lab Capabilities
We have documented 96 different Servo Manufacturer repair reports in our Database
We repair AC Servos, DC Servos, AC Spindles, and AC Actuators
Capable of 24-hour repairs in many cases
We have thousands of spare and rebuilt motors in our inventory for parts or exchange motorsServo Lab Repair Procedures
-
Data
Motor nameplate data is recorded
-
Inspection
A visual inspection of any damage to the motor.
We check for- Damaged Leads/Terminals
- Worn output shaft/keyways
- Cracks in end bells or covers
-
Job Ticket
We complete to full write up off all motor data
Including- All winding tests (Resistance, Meg Ω, Continuity)
- All bearing sizes
- All seal sizes
- Brake torque tests (Record Torque, winding resistance)
- Feedback Tests (Tachometer/Encoder)
-
Motor Disassembly
- Bearing and seal sizes are recorded
- Bearing fits are measured on shaft and End bell
- Brake torque is measured as well as resistance and Meg Ω
- More winding tests are performed (Surge and HiPOT tests)
- Stator is then washed and baked in oven
- Magnets are inspected for cracks or if loose on shaft
- Encoder is tested with either (Heidenhain PWM20, Sick PGT-11, or Mitchell Electronics equipment)
-
Assembly
- New bearings are installed
- New seals are installed
- If required, new windings are impregnated
- Brakes are rebuilt or replaced depending on manufacturer design.
- Rebuilt or New encoders are installed and aligned using:
- (Heidenhain PWM20, Sick PGT-11, or Mitchell Electronics equipment)
-
Rotor Balancing and Testing
- Rotor is run through a full vibration diagnostic
-
Run Testing
- Every Motor is Run for a minimum of 1 hour using one of our drives.
- We use Siemens S110, S120, IndraDrive, AB Kinetix 300, Yaskawa 7, and AMC drives
-
Service Report
- A Final 3-page Service Report is filled out
- Pinout diagram for power and feedback is provided
- Brake torque is recorded a final time for our Service Reports
- A photo of nameplate and motor is attached
- A motor tag is installed on motor with QR code linking Service Report and Job Histories
- If requested, a YouTube link is attached to the service report of motor
A&C Electric is a certified distributor service center.