encapsulated
Sort by:
Baldor VFSWDM3545-4E
$1,860.17
Baldor VFSWDM3545-E
$1,860.17
Baldor VFSWDM3546-4E
$1,879.49
Baldor VFSWDM3546-5E
$1,879.49
Baldor VFSWDM3546-E
$1,879.49
Baldor VFSWDM3546-E-G
$2,162.65
Baldor VFSWDM3546T-5E
$1,898.15
Baldor VFSWDM3546T-E
$1,898.15
Baldor VFSWDM3546T-E-G
$2,181.30
Baldor VFSWDM3550-4E
$1,972.10
Baldor VFSWDM3550-E
$1,972.10
Baldor VFSWDM3550T-E
$1,989.42
Baldor VFSWDM3554-E
$2,016.07
Baldor VFSWDM3554T-5E
$2,072.70
Baldor VFSWDM3554T-E
$2,072.70
Baldor VFSWDM3555T-E
$2,359.19
Baldor VFSWDM3556-E
$2,239.27
Baldor VFSWDM3558-E
$2,343.20
Baldor VFSWDM3558T-5E
$2,389.17
Baldor VFSWDM3558T-E
$2,389.17
Baldor VFSWDM3559-E
$2,780.93
Baldor VFSWDM3559-E-G
$3,064.08
Baldor VFSWDM3559T-4E
$2,792.25
Baldor VFSWDM3559T-E
$2,792.25
Baldor VFSWDM3611T-E
$2,860.88
Baldor VFSWDM3613T-4E
$3,035.44
Baldor VFSWDM3613T-E
$3,035.44
Baldor VFSWDM3615T-4E
$3,059.42
Baldor VFSWDM3615T-E
$3,059.42
Baldor VFSWDM3615T-E-G
$3,342.58
Baldor VFSWDM3651-E
$2,845.55
Baldor VFSWDM3651T-E
$2,850.88
Baldor VFSWDM3651T-E-G
$3,134.04
Baldor VFSWDM3709T-E
$3,795.63
Baldor VFSWDM3710T-E
$3,876.24
Baldor VFSWDM3711T-E
$4,323.96
Baldor VFSWDM3713T-E
$6,557.23
Baldor VFSWDM3714T-5E
$4,591.13
Baldor VFSWDM3714T-E
$4,591.13
Baldor VFSWDNM3554-4E
$1,946.78
Baldor VFSWDNM3554-E
$1,946.78
Baldor VFSWDNM3554-E-G
$2,229.94
Baldor VFSWDNM3554T-E
$2,002.75
Baldor VFSWDNM3554T-E-G
$2,285.90
Baldor VFSWDNM3555-E
$2,239.93
Baldor VFSWDNM3555T-4E
$2,289.90
Baldor VFSWDNM3555T-E
$2,289.90
Baldor VFSWDNM3558-E
$2,273.25
Baldor VFSWDNM3558-E-G
$2,556.40
Baldor VFSWDNM3558T-4E
$2,318.55
Baldor VFSWDNM3558T-E
$2,318.55
Baldor VFSWDNM3558T-E-G
$2,601.71
Baldor VFSWDNM3610T-E
$2,872.87
Baldor VFSWDNM3611T-4E
$2,771.60
Baldor VFSWDNM3611T-E
$2,771.60
Servo Lab Capabilities
We have documented 96 different Servo Manufacturer repair reports in our Database
We repair AC Servos, DC Servos, AC Spindles, and AC Actuators
Capable of 24-hour repairs in many cases
We have thousands of spare and rebuilt motors in our inventory for parts or exchange motorsServo Lab Repair Procedures
-
Data
Motor nameplate data is recorded
-
Inspection
A visual inspection of any damage to the motor.
We check for- Damaged Leads/Terminals
- Worn output shaft/keyways
- Cracks in end bells or covers
-
Job Ticket
We complete to full write up off all motor data
Including- All winding tests (Resistance, Meg Ω, Continuity)
- All bearing sizes
- All seal sizes
- Brake torque tests (Record Torque, winding resistance)
- Feedback Tests (Tachometer/Encoder)
-
Motor Disassembly
- Bearing and seal sizes are recorded
- Bearing fits are measured on shaft and End bell
- Brake torque is measured as well as resistance and Meg Ω
- More winding tests are performed (Surge and HiPOT tests)
- Stator is then washed and baked in oven
- Magnets are inspected for cracks or if loose on shaft
- Encoder is tested with either (Heidenhain PWM20, Sick PGT-11, or Mitchell Electronics equipment)
-
Assembly
- New bearings are installed
- New seals are installed
- If required, new windings are impregnated
- Brakes are rebuilt or replaced depending on manufacturer design.
- Rebuilt or New encoders are installed and aligned using:
- (Heidenhain PWM20, Sick PGT-11, or Mitchell Electronics equipment)
-
Rotor Balancing and Testing
- Rotor is run through a full vibration diagnostic
-
Run Testing
- Every Motor is Run for a minimum of 1 hour using one of our drives.
- We use Siemens S110, S120, IndraDrive, AB Kinetix 300, Yaskawa 7, and AMC drives
-
Service Report
- A Final 3-page Service Report is filled out
- Pinout diagram for power and feedback is provided
- Brake torque is recorded a final time for our Service Reports
- A photo of nameplate and motor is attached
- A motor tag is installed on motor with QR code linking Service Report and Job Histories
- If requested, a YouTube link is attached to the service report of motor
A&C Electric is a certified distributor service center.