Free Repair Quotes

Repairs and Service For

Farm duty

New ABB Motors » Farm duty

Sort by:

Baldor CFDL3504M $810.81

Baldor CFDL3507M $941.93

Baldor CFDL3510M $1,063.13

Baldor CFDL3514M $1,194.95

Baldor CFDL3516TM $1,514.60

Baldor FDAOL3504A $566.29

Baldor FDAOL3507A $618.74

Baldor FDAOL3521A $671.19

Baldor FDAOL3532A $790.26

Baldor FDL1177T $5,361.69

Baldor FDL3501M $528.73

Baldor FDL3504M $617.32

Baldor FDL3507M $725.05

Baldor FDL3510M $820.73

Baldor FDL3510TM $820.73

Baldor FDL3514M $923.50

Baldor FDL3514TM $925.63

Baldor FDL3516TM $1,306.23

Baldor FDL3610M $1,793.85

Baldor FDL3610TM $1,750.61

Baldor FDL3611M $1,511.06

Baldor FDL3611TM $1,472.78

Baldor FDL3612TM $1,837.08

Baldor FDL3619TM $1,409.70

Baldor FDL3712TM $2,628.05

Baldor FDL3731M $2,257.37

Baldor FDL3732M $2,597.57

Baldor FDL3733TM $2,391.32

Baldor FDL3737TM $2,797.44

Baldor FDL3912T $4,055.47

Baldor VFDFL3516TM $1,514.60

Baldor VFDFL3610TM $2,051.83

Baldor VFDFL3612TM $2,505.43

Baldor VFDL3501M $682.53

Baldor VFDL3504M $781.75

Baldor VFDL3507M $910.04

Baldor VFDL3510M $1,029.11

Baldor VFDL3514M $1,165.89

Baldor VFDL3516TM $1,514.60

Baldor VFDL3610TM $2,051.83

Baldor VFDL3612TM $2,505.43

Direct Drive fan motor

Grain dryer

Grain stirring motor

Servo Lab Capabilities

We have documented 96 different Servo Manufacturer repair reports in our Database

We repair AC Servos, DC Servos, AC Spindles, and AC Actuators

Capable of 24-hour repairs in many cases

We have thousands of spare and rebuilt motors in our inventory for parts or exchange motors

Servo Lab Repair Procedures

Data

Motor nameplate data is recorded

Inspection

A visual inspection of any damage to the motor.

We check for

Damaged Leads/Terminals
Worn output shaft/keyways
Cracks in end bells or covers

Job Ticket

We complete to full write up off all motor data

Including

All winding tests (Resistance, Meg Ω, Continuity)
All bearing sizes
All seal sizes
Brake torque tests (Record Torque, winding resistance)
Feedback Tests (Tachometer/Encoder)

Motor Disassembly

Bearing and seal sizes are recorded
Bearing fits are measured on shaft and End bell
Brake torque is measured as well as resistance and Meg Ω
More winding tests are performed (Surge and HiPOT tests)
Stator is then washed and baked in oven
Magnets are inspected for cracks or if loose on shaft
Encoder is tested with either (Heidenhain PWM20, Sick PGT-11, or Mitchell Electronics equipment)

Assembly

New bearings are installed
New seals are installed
If required, new windings are impregnated
Brakes are rebuilt or replaced depending on manufacturer design.
Rebuilt or New encoders are installed and aligned using:
(Heidenhain PWM20, Sick PGT-11, or Mitchell Electronics equipment)

Rotor Balancing and Testing

Rotor is run through a full vibration diagnostic

Run Testing

Every Motor is Run for a minimum of 1 hour using one of our drives.
We use Siemens S110, S120, IndraDrive, AB Kinetix 300, Yaskawa 7, and AMC drives

Service Report

A Final 3-page Service Report is filled out
Pinout diagram for power and feedback is provided
Brake torque is recorded a final time for our Service Reports
A photo of nameplate and motor is attached
A motor tag is installed on motor with QR code linking Service Report and Job Histories
If requested, a YouTube link is attached to the service report of motor

Electrical Apparatus Service Association

A&C Electric is a certified distributor service center.